QuadMeUp Crossbow
QuadMeUp Crossbow is a DIY project that gives 5km (at least) of RC link for UAV (airplanes and drones) for a price below $40. I uses SX1276 (LoRa 868MHz/915MHz) compatible (like HopeRF RFM95W) radio modules connected to Arduino compatible boards. It can be regular Arduino connected via SPI to SX1276 or dedicated board like Adafruit Feather 32u4 RFM LoRa or LoRa32u4 II
Current state
Development, not yet functional
Protocol
| Byte | Description | Notes |
|---|---|---|
| 1 | Preamble | "Q" 0x51 |
| 2 | Channel ID | channel used for comunication between TX and RX |
| 3 | Frame type & Length | bits 7-5 defines frame, bits 4-0 payload length |
| 4 | Packet ID | |
| 5 - 36 | Payload | 32 bytes max |
| payload length + 5 | CRC | XOR of all previous bytes |
Frame types
| Value | Value hex | Description | Direction |
|---|---|---|---|
| 0000 | 0x0 | RC channels data RC_DATA |
TX -> RX |
| 0001 | 0x1 | Receiver health and basic telemetry RX_HEALTH |
RX -> TX |
| 0010 | 0x2 | Request receiver configuration | TX -> RX |
| 0011 | 0x3 | Receiver configuration | RX -> TX |
| 0100 | 0x4 | Set receiver configuration | TX -> RX |
RC_DATA frame format
Protocol allows to send 10 RC channels in total encoded as following
- channels 1 to 4 encoded using 10 bits each (5 bytes)
- channels 5 to 6 encoded using 8 bits each (2 bytes)
- channels 7 to 10 encoded using 4 bits per channel (2 bytes)
Total length of RC_DATA payload is 9 bytes
RX_HEALTH frame format
| Byte | Description |
|---|---|
| 0 | RX RSSI |
| 1 | RX SNR |
| 2 | RX supply volatage, sent in 0,1V |
| 3 | RX analog input 1 sent in 0,1V |
| 4 | RX analog input 2 sent in 0,1V |