Basic init page

crossbow/config.h

@@ -18,7 +18,7 @@
 #define DEVICE_MODE_TX
 // #define DEVICE_MODE_RX
 
-// #define FEATURE_TX_OLED
+#define FEATURE_TX_OLED
 // #define FORCE_TX_WITHOUT_INPUT
 
 /*
@@ -32,6 +32,5 @@
 #define DEBUG_SERIAL
 // #define DEBUG_PING_PONG
 // #define DEBUG_LED
-// #define DEBUG_TX_INPUT_ON_OLED
 
 #endif

crossbow/crossbow.ino

@@ -57,13 +57,8 @@ volatile int16_t TxInput::channels[TX_INPUT_CHANNEL_COUNT];
 BuzzerState_t buzzer;
 
 #ifdef FEATURE_TX_OLED
-#include "Wire.h"
+#include "tx_oled.h"
-
+TxOled oled;
-#define OLED_RESET -1
-#include <Adafruit_SSD1306.h>
-Adafruit_SSD1306 display(OLED_RESET);
-uint32_t lastOledTaskTime = 0;
-
 #endif
 
 #include "tactile.h"
@@ -71,11 +66,6 @@ uint32_t lastOledTaskTime = 0;
 Tactile button0(BUTTON_0_PIN);
 Tactile button1(BUTTON_1_PIN);
 
-    // uint8_t buttonStates[2] = {HIGH, HIGH};
-    // uint8_t previousButtonStates[2] = {HIGH, HIGH};
-    // uint32_t buttonPressMillis[2] = {0, 0};
-    // uint8_t buttonAction[2] = {BUTTON_ACTION_NONE, BUTTON_ACTION_NONE};
-
 #endif
 
 /*
@@ -252,13 +242,8 @@ void setup(void)
 #ifdef DEVICE_MODE_TX
 
 #ifdef FEATURE_TX_OLED
-    Wire.setClock(400000);
+    oled.init(&radioState);
-
+    oled.page(TX_PAGE_INIT);
-    display.begin(SSD1306_SWITCHCAPVCC, 0x3C); // initialize with the I2C addr 0x3C (for the 128x32)
-    display.setTextSize(1);
-    display.setTextColor(WHITE);
-    display.clearDisplay();
-    display.display();
 #endif
 
     /*
@@ -625,41 +610,38 @@ void loop(void)
     }
 
 #ifdef FEATURE_TX_OLED
-    if (
+    // if (
-        currentMillis - lastOledTaskTime > OLED_UPDATE_RATE
+        // currentMillis - lastOledTaskTime > OLED_UPDATE_RATE
-    ) {
+    // ) {
-        lastOledTaskTime = currentMillis;
+        // lastOledTaskTime = millis();
-        display.clearDisplay();
 
-        display.setTextColor(WHITE, BLACK);
+        
-        display.setCursor(0, 0);
-        display.setTextSize(3);
-        display.print(radioState.rssi);
 
-        display.setCursor(18, 28);
+        // display.setTextColor(WHITE, BLACK);
-        display.setTextSize(2);
+        // display.setCursor(0, 0);
-        display.print(radioState.snr);
+        // display.setTextSize(3);
+        // display.print(radioState.rssi);
 
-        display.setCursor(74, 0);
+        // display.setCursor(18, 28);
-        display.setTextSize(3);
+        // display.setTextSize(2);
-        display.print(rxDeviceState.rssi);
+        // display.print(radioState.snr);
 
-        display.setCursor(92, 28);
+        // display.setCursor(74, 0);
-        display.setTextSize(2);
+        // display.setTextSize(3);
-        display.print(rxDeviceState.snr);
+        // display.print(rxDeviceState.rssi);
 
-        #ifdef DEBUG_TX_INPUT_ON_OLED
+        // display.setCursor(92, 28);
-        display.setCursor(0, 48);
+        // display.setTextSize(2);
-        display.setTextSize(2);
+        // display.print(rxDeviceState.snr);
-        display.print(txInput.channels[0]);
-        #endif
 
-        display.setCursor(54, 48);
+        // display.setCursor(54, 48);
-        display.setTextSize(2);
+        // display.setTextSize(2);
-        display.print(txDeviceState.roundtrip);
+        // display.print(txDeviceState.roundtrip);
+        
+        // display.display();
 
-        display.display();
+        // Serial.println(millis() - lastOledTaskTime);
-    }
+    // }
 #endif
 
     /*

crossbow/tx_oled.cpp

@@ -0,0 +1,39 @@
+#include "tx_oled.h"
+
+TxOled::TxOled(void) {
+    Adafruit_SSD1306 _display(-1);
+}
+
+void TxOled::init(volatile RadioState_t *radioState) {
+    _display.begin(SSD1306_SWITCHCAPVCC, 0x3C); // initialize with the I2C addr 0x3C (for the 128x32)
+    _display.setTextSize(1);
+    _display.setTextColor(WHITE);
+    _display.clearDisplay();
+    _display.display();
+
+    _radioState = radioState;
+}
+
+void TxOled::page(int page) {
+    switch (page) {
+
+        case TX_PAGE_INIT:
+            pageInit();
+            break;
+
+    }
+}
+
+void TxOled::pageInit(void) {
+    _display.clearDisplay();
+
+    _display.setTextColor(WHITE, BLACK);
+    _display.setCursor(0, 0);
+    _display.setTextSize(2);
+    _display.print("Rdy ");
+    _display.print(_radioState->loraTxPower);
+    _display.print("dBm");
+}
+
+
+

crossbow/tx_oled.h

@@ -0,0 +1,28 @@
+#pragma once
+
+#ifndef TX_OLED_H
+#define TX_OLED_H
+
+#include <Adafruit_SSD1306.h>
+#include "Wire.h"
+#include "variables.h"
+
+#define OLED_RESET -1
+
+enum txOledPages {
+    TX_PAGE_NONE,
+    TX_PAGE_INIT,
+};
+
+class TxOled {
+    public:
+        TxOled(void);
+        void init(volatile RadioState_t *radioState);
+        void page(int page);
+    private:
+        volatile RadioState_t *_radioState;
+        Adafruit_SSD1306 _display;
+        void pageInit(void);
+};
+
+#endif